Pure Global AI
ZAMRA · structured requirements

🇿🇲 Zambia medical device regulatory data

Explore the medical device requirements currently available for Zambia, organized by topic and linked to official sources.

41 facts25 dimensions8 official sourceslatest verification 2026-09-16

Advertising, claims & promotion

Which claims, audiences, channels, approvals, and restrictions apply?

Compare countries

Advertising and promotion of allied substances requires marketing authorisation and attracts specific fees

advertising.marketing-authorisation-required-and-fee-heads
Fact-level verified
Statement

The Act prohibits any person from advertising or marketing a medicine or allied substance without a marketing authorisation issued by the Authority, so a device may not be advertised in Zambia before it is authorised. ZAMRA's fee schedule carries separate heads for advertising medicines to the general public (ZMW 5,000), promotion to health-care professionals (ZMW 1,000) and exhibition of medicines at a public event (ZMW 2,000), under the heading 'Advertising and Promotion of Medicines and Allied Substances'.

Conditions
  • The fee heads are worded for medicines although the heading covers allied substances; no separate device advertising fee or device advertising guideline was retrieved.
  • The Act's section 39(1) prohibition covers advertising, marketing and dealing, not only physical supply.

Act verbatim: '39. (1) A person shall not place on the market, advertise, market, manufacture, sell, import, supply, administer or deal in any manner with any medicine or allied substance without a marketing authorisation issued by the Authority.' Fee schedule verbatim: '3. Advertising and Promotion of Medicines and Allied Substances a Advertising medicines to the general public 16,667 5,000.00 b Promotional medicines to the health care professional fees 3,333 1,000.00 c Exhibition of medicines at a public event fees 6,667 2,000.00'.

Approval validity & renewal

What expires, what is retained periodically, and when must renewal start?

Compare countries

Marketing authorisation is valid for five years and subject to annual retention fees

validity.five-year-marketing-authorisation
Fact-level verified
Statement

A marketing authorisation granted by ZAMRA is valid for five years subject to terms and conditions the Authority may specify, the period running from the date of grant. The marketing authorisation holder must pay the annual retention fee prescribed by the Minister, and under the 2019 renewal guidelines an application for renewal of marketing authorisation should be submitted to the Authority five years from the date of grant or when requested by the Authority, whichever date is earlier. The Authority may suspend or revoke a marketing authorisation and remove the device from the register by written notice for reasons including non-payment of the prescribed annual retention fee and an unforeseen high public or personal health risk associated with using the device.

Conditions
  • The five-year validity and the annual retention obligation are separate: retention is payable annually even though the authorisation runs five years.
  • The 2019 renewal guideline states that it is intended for marketing authorisations issued before 2015 and that the Authority 'will issue an additional guideline for products registered from 1st January 2015 and onwards'; the five-year validity statement in the IVD guideline is not limited in that way.
  • Annual retention for an imported allied substance is US$200 and renewal is US$350 under the current fee schedule; late renewal costs US$5 per day.
  • Restoration of marketing authorisation for allied substances is ZMW 1,200.

Verbatim: '1.11.1 Validity of Marketing Authorisation. A Marketing Authorisation shall be valid for five (5) years subject to terms and conditions as may be specified by the Authority. The period of validity is from the date of grant of Marketing Authorisation.' Renewal guideline: 'a Marketing Authorisation Holder (MAH) should submit an application for Renewal of Marketing Authorisation (MA) to the Authority 5 years from the date of grant of MA or when requested to do so by the Authority (whichever date is earlier)'. Act: '39. (7) A holder of a marketing authorisation shall pay such annual retention fee as the Minister may prescribe.'

Authority & regime

Which authority and binding regime govern this product, task, and date?

Compare countries

Zambia Medicines Regulatory Authority (ZAMRA) is the competent authority for medical devices as allied substances

authority.zamra-competent-authority
Fact-level verified
Statement

The Zambia Medicines Regulatory Authority (ZAMRA) is a statutory body established under the Medicines and Allied Substances Act No. 3 of 2013. It regulates and controls medicines and allied substances, including the manufacture, importation, exportation, distribution and sale of allied substances, and 'allied substances' are defined by the Act to include medical devices and condoms. A person may not place on the market, advertise, manufacture, sell, import, supply, administer or deal in any medicine or allied substance without a marketing authorisation issued by the Authority. ZAMRA grants that authorisation under section 39 of the Act, and it also issues the device guidelines under section 68.

Conditions
  • Medical devices are regulated as 'allied substances', not as a separate statutory category: the Act defines 'allied substances' to 'include acaricides, cosmetics, disinfectants, food supplements, feed additives and supplements, medical and surgical sundries, medical devices and condoms'.
  • The Act's device-specific provisions sit in Part VIII (sections 64-65) on cosmetics and medical devices; section 65 prohibits sale of a harmful medical device and manufacture, import, sale or supply of a device that does not meet prescribed standards of quality.
  • ZAMRA also registers premises and licenses manufacturers and wholesalers separately from product marketing authorisation.

Verbatim: "'allied substances' include acaricides, cosmetics, disinfectants, food supplements, feed additives and supplements, medical and surgical sundries, medical devices and condoms" and '39. (1) A person shall not place on the market, advertise, market, manufacture, sell, import, supply, administer or deal in any manner with any medicine or allied substance without a marketing authorisation issued by the Authority.' The ZAMRA non-IVD guideline adds: 'The Zambia Medicines Regulatory Authority (ZAMRA) is a statutory body established pursuant to the Medicines and Allied Substances Act, No.3 of 2013 of the Laws of Zambia ("the Act").'

Change control

Does the event require internal documentation, notice, prior approval, transfer, or a new application?

Compare countries

Amendments are filed as minor or major variations, and an IVD amendment has its own application route

change.amendment-of-marketing-authorisation
Fact-level verified
Statement

Changes to a granted marketing authorisation are made by way of an amendment application, and ZAMRA's fee schedule distinguishes a minor amendment (US$100 for an imported allied substance) from a major amendment (US$500). The IVD guideline provides a distinct application for amendment of an IVD device with marketing authorisation. The non-IVD guideline requires the applicant to remain responsible for the product information supporting the application 'and variations thereof'. Where an applicant fails to supply additional information within the stipulated time, the IVD application is closed and must be resubmitted as a new application.

Conditions
  • The criteria distinguishing a minor from a major amendment are set out in ZAMRA's separate Amendment for Marketing Authorisation guidelines, which were not retrieved; the classification guideline states that the Authority may reclassify a medical device, which would itself be a change event.
  • Amendment fees for locally manufactured or packaged allied substances are ZMW 400 (minor) and ZMW 1,950 (major).
  • Amendment to licences, certificates and permits (including loss and transfer) is ZMW 450.

ZAMRA published fee schedule verbatim: '7. Amendment Fees for Medicines and Allied Substances Imported as Finished Products a Minor amendment US$ 100.00 b Major amendment US$ 500.00'. IVD guideline table of contents: '1.12 Application for amendment of an IVD device with Marketing Authorisation'.

Classification rules

What local class follows from which rules and decisive product facts?

Compare countries

Four risk classes A to D under the GHTF/SG1/N77:2012 classification rules

classification.four-risk-classes-ghtf
Fact-level verified
Statement

Medical devices are classified into four classes, Class A (lowest hazard) to Class D (highest hazard), using the classification rules in ZAMRA/MA/GUD/0002, which is an adaptation of the GHTF document Principles of Medical Devices Classification (GHTF/SG1/N77:2012). The guideline sets out classification rules for non-invasive devices, invasive devices and active devices, plus additional rules, and the manufacturer determines the device class. IVD devices are classified in a parallel four-class system based on individual and public-health risk, and where more than one classification rule applies, or the device has multiple intended uses, it is allocated to the highest class indicated.

Conditions
  • The classification rules are structured in the guideline as 7.1 Non-Invasive Devices, 7.2 Invasive Devices, 7.3 Active Devices and 7.4 Additional Rules, with Appendix A decision trees; section 8.0 deals with reclassification of medical devices.
  • Class descriptions on the NDA page equivalent do not apply here: ZAMRA's own risk-band table is in the IVD guideline (Class A low individual and low public-health risk; Class B moderate individual and/or low public-health risk; Class C high individual and/or moderate public-health risk; Class D high individual and high public-health risk).
  • Dossier depth follows the class: the non-IVD technical information requirement is 'as per Non IVD MA ToC (Chapters 1-6) for Class B to D and as per Annex II for Class A Devices'.

Verbatim (ZAMRA/MA/GUD/0002 cover and preface): 'This document has been adapted from the the Global Harmonization Task Force (GHTF) document. Principles of Medical Devices Classification Study Group 1 Final Document GHTF/SG1/N77:2012'. Classification scale: 'A represents the lowest hazard and Class D the highest.'

Clinical investigation & performance

Which clinical or IVD performance evidence or study is required and accepted?

Compare countries

Clinical evidence is a distinct dossier chapter and the Essential Principles document governs performance evidence

clinical.clinical-evidence-chapter-and-essential-principles
Fact-level verified
Statement

The non-IVD dossier contains a dedicated Chapter 4 on Clinical Evidence, and the guideline's Annex I form requires the applicant to declare whether there have been previous recalls, reportable adverse incidents, banning in other countries or post-market surveillance studies, attaching relevant documentation. The Essential Principles of Safety and Performance of Medical Devices (ZAMRA/MA/GUD/0001) is published by ZAMRA as the conformity standard against which safety and performance are assessed, and the dossier also requires an Essential Principles checklist and a declaration of conformity. IVD grant of marketing authorisation requires the Authority to be satisfied that the product conforms with the Essential Principles of Safety and Performance.

Conditions
  • The Essential Principles document follows IMDRF/GRRP/WG/N47 FINAL:2018 (its running header) and cites IMDRF/GRRP WG/N040:2017; it defines clinical evaluation, clinical investigation and clinical study terms.
  • No separate ZAMRA clinical-investigation application form or authorisation procedure for devices was found; the guideline's clinical chapter sits inside the marketing authorisation dossier, and the fees schedule's clinical-trial heads are worded for investigational products (locally manufactured in the Kwacha table, imported in the USD table).
  • The IVD guideline's Annex checklist for IVDs likewise does not set out a device clinical-trial regime.

Verbatim from the dossier table of contents: 'CHAPTER 4 – CLINICAL EVIDENCE'. Annex I form fields: 'Have there been any of the following: Previous recalls / Reportable adverse incidents / Banning in other countries / Post-market surveillance studies'.

Device definition & scope

Is the product a device, IVD, accessory, software, or borderline product locally?

Compare countries

Definition and scope: medical devices are 'allied substances'; non-IVD guideline excludes condoms and medical gloves

scope.definition-of-medical-device
Fact-level verified
Statement

The Act defines a medical device to 'include an instrument, apparatus, component, part or accessory manufactured or sold for use in the diagnosis, treatment, mitigation or prevention of a disease, disorder or abnormal physical state or the symptoms of the disease, or abnormal physical state in human beings or animals'. The non-IVD guideline uses a longer definition covering instruments, apparatus, implements, machines, appliances, implants, reagents for in vitro use, software and materials intended for diagnosis, prevention, monitoring, treatment or alleviation of disease, injury, investigation or support of anatomy or physiological process, supporting or sustaining life, control of conception, disinfection of medical devices and providing information by in vitro examination, provided the device does not achieve its primary intended action by pharmacological, immunological or metabolic means. The non-IVD guideline's scope expressly covers non in-vitro medical devices other than in-vitro diagnostics, and its definition of 'non in-vitro medical devices' excludes condoms and medical gloves, which are handled under separate ZAMRA instruments. The IVD guideline applies to in-vitro diagnostic devices for human use, excluding in-vitro diagnostics for veterinary use.

Conditions
  • The Act's definition covers devices for use in human beings or animals; the non-IVD and IVD guidelines are both limited to human use.
  • The IVD guideline defines an IVD device to include reagents, calibrators, control materials, specimen receptacles, software and related instruments or apparatus, excluding veterinary IVDs.
  • ZAMRA also publishes separate guidelines for condoms, medical gloves, antiseptics and disinfectants, nutritional supplements and cosmetics.

Verbatim: '“medical device” means any instrument, apparatus, implement, machine, appliance, implant, reagent for in vitro use, software, material or other similar or related article, intended by the manufacturer to be used, alone or in combination, for human beings, for one or more of the specific medical purpose(s) of: I. diagnosis, prevention, monitoring, treatment or alleviation of disease ...' and '“non in-vitro medical devices” means medical devices other than in-vitro diagnostics with the exception of condoms and medical gloves'.

Dossier requirements

Which evidence, local deltas, formats, and signatures are required?

Compare countries

Six-chapter dossier: administrative, submission context, non-clinical, clinical, labelling and QMS

dossier.five-chapter-technical-file
Fact-level verified
Statement

The non-IVD dossier follows a six-chapter table of contents supplied in the guideline: Chapter 1 Administrative (cover letter, table of contents, application form, listing of devices, quality management system and other regulatory certificates, free sale certificate or certificate of marketing authorisation, expedited review documentation, statements and declarations of conformity); Chapter 2 Submission Context (general summary, device description, indications for use and contraindications, global market history with incident reports and recalls and sales/incident/recall rates, and evaluation or inspection reports); Chapter 3 Non-clinical Evidence (risk management, Essential Principles checklist, standards, and physical, chemical, electrical, radiation and software studies); Chapter 4 Clinical Evidence; Chapter 5 Labelling; and Chapters 6A and 6B on quality management system procedures and device-specific QMS. The Annex II checklist requires the administrative information, the certificates listed above, the technical information 'as per Non IVD MA ToC (Chapters 1-6) for Class B to D and as per Annex II for Class A Devices', and any other relevant documents.

Conditions
  • The Chapter 2 'Global Market History' block calls for global incident reports and recalls and sales, incident and recall rates, which makes post-market history a premarket dossier item.
  • Clinical evidence is a distinct chapter (Chapter 4) rather than being subsumed into the non-clinical chapter.
  • The Annex I form additionally asks for the GMDN description of the device, the device classification (A/B/C/D), previous recalls, reportable adverse incidents, banning in other countries, post-market surveillance studies, and the international or national standards with which the device complies.

Verbatim: 'CHAPTER 1 – ADMINISTRATIVE ... 1.05 Listing of Device(s) 1.06 Quality Management System, Full Quality System or Other Regulatory Certificates 1.07 Free Sale Certificate/ Certificate of Marketing authorisation 1.08 Expedited Review Documentation 1.09 Pre-Submission Correspondence and Previous Regulator Interactions ...' and Annex II: 'Certificates - Original or notarized Free Sale Certificate / Notarized Manufacturing Licence / Notarized Registration Certificates / ISO 13485 certificate / Technical Information - Information provided as per Non IVD MA ToC (Chapters 1-6) for Class B to D and as per Annex II for Class A Devices.'

Economic-operator roles

Which manufacturer, representative, holder, applicant, importer, and distributor roles apply?

Compare countries

A non-resident applicant must appoint a local responsible person with power of attorney, and a local distributor

operator.local-responsible-person-and-distributor
Fact-level verified
Statement

An applicant who is not resident in Zambia must appoint a local responsible person with a power of attorney who is responsible for compliance with the regulatory requirements for non in-vitro medical devices. The Annex I application form requires the details of the local responsible person (with the power of attorney attached) and the details of the authorised local distributor (with the letter of appointment attached); a contact person responsible for communicating with the Authority must also be designated, with a letter of authorisation to communicate on the applicant's behalf. The applicant remains responsible for the product information supporting the application and its variations. The IVD guideline similarly requires an applicant not resident in Zambia to nominate a local representative, and permits a nominee of the applicant to submit with a copy of the power of attorney.

Conditions
  • 'Local responsible person' is defined as 'a natural or legal person, resident in Zambia, appointed by a foreign-based Marketing Authorisation Holder to be responsible for all regulatory matters in respect of products granted marketing authorisation with a valid Power of Attorney'.
  • The marketing authorisation holder, not the local responsible person, is the party on whom the Act places the annual retention fee obligation.
  • Details of the local distributor are a separate form field from the local responsible person, so both roles are expected to be named.

Verbatim: 'An applicant who is not resident in Zambia shall appoint a local responsible person with power of attorney who shall be responsible for compliance to regulatory requirements with respect to non in-vitro medical devices.' Definition: '“local responsible person” means a natural or legal person, resident in Zambia, appointed by a foreign-based Marketing Authorisation Holder to be responsible for all regulatory matters in respect of products granted marketing authorisation with a valid Power of Attorney'.

Establishment, import & distribution

Which establishment licences, importer permissions, and distribution controls apply?

Compare countries

Import and export permits and premises licences are separate from product marketing authorisation

establishment.import-permits-and-premises-licences
Fact-level verified
Statement

ZAMRA controls importation and exportation through permits and licences separate from product marketing authorisation. The Act requires a marketing authorisation for any importation or supply of an allied substance (s.39(1)), and ZAMRA's published Fees for Permits schedule provides for import and export permits (333 fee units / ZMW 100), importation of medicines for personal use, importation of medicines in small quantities and importation of raw and packaging materials, together with wholesale pharmaceutical licences and health-shop and agro-veterinary-shop permits. ZAMRA's Fees for Marketing Authorisation schedule ('Other fees') charges preclearance quality-assurance fees on imports as a percentage of FOB invoice value: 1.5 per cent for registered commercial consignments, 5 per cent for unregistered medicines and allied substances, 1 per cent for donations and 1 per cent for active pharmaceutical ingredients, bulk finished products and intermediates.

Conditions
  • The permit fee heads are worded for medicines in several places (for example 'Importation of medicines for personal use'), so the device-specific scope of each head is not stated in the schedule itself.
  • ZAMRA's notice of 10 September 2024 states that only import controls apply to Class C and D non-IVD devices until their registration phase opens, and importers must obtain import permits from the Authority.
  • The 5 per cent preclearance head for unregistered allied substances is a fee provision only; no substantive ZAMRA instrument permitting general importation of unregistered devices was retrieved.

Verbatim (Fees for Permits): '1. Import and Export Permit ... a Importation of medicines for personal use 333 100.00 b Importation of medicines in small quantities 2,500 750.00 c Fees for importation of raw materials and packaging materials 333 100.00 d Fees for import or export permit 333 100.00'. Fee schedule 'Other fees': 'Preclearance Fees for Quality Assurance (QA) of imports for commercial consignments, Government ministries departments, Programs projects and similar institutions 1.5% of FOB invoice value' and '... of imports for unregistered medicines and Allied substance for commercial consignments ... 5% of FOB invoice value'.

Fees

What regulator fee applies to this class, route, event, and date?

Compare countries

Fee for marketing authorisation of an imported allied substance (device) US$500; annual retention US$200; renewal US$350

fees.marketing-authorisation-and-retention-fees
Fact-level verified
Statement

Under the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016) and ZAMRA's published fee schedule, the application fee for marketing authorisation of an allied substance imported as a finished product is US$500; the annual retention fee is US$200; renewal of marketing authorisation is US$350; evaluation of additional information supplied with an application on inadequate technical information is US$400; a minor amendment is US$100 and a major amendment US$500; and late submission of a renewal application costs US$5 for each day the application is late. For locally manufactured or packaged products the corresponding allied-substance fees are payable in Zambian Kwacha: ZMW 1,500 for marketing authorisation, ZMW 1,000 annual retention, ZMW 1,200 renewal, ZMW 400 minor amendment and ZMW 1,950 major amendment. Fast tracking is charged at double the applicable marketing authorisation fee.

Conditions
  • Medical devices are 'allied substances' under the Act, so the allied-substance fee lines are the device fee lines; ZAMRA's fee schedule has no separate medical-device fee head.
  • The fee regulations are the 2016 instrument; the amounts were reproduced unchanged in ZAMRA's current published Marketing Authorisation fee schedule, which is denominated in fee units at 30 Ngwee per fee unit for the Kwacha table and in US dollars for the imported-products table.
  • The 2016 instrument was read by OCR from a scanned gazette PDF; the US dollar amounts were cross-checked against ZAMRA's current published fee schedule and agree.
  • Advertising of medicines and allied substances to the general public is a separate fee head (ZMW 5,000), as are promotional fees to health-care professionals (ZMW 1,000) and exhibition at a public event (ZMW 2,000).

ZAMRA published fee schedule verbatim: '3. Application for Marketing Authorisation Allied Substances Imported as Finished Products a Allied Substances US$ 500.00 ... 5. Annual Retention Fees for Medicines or Allied Substances Imported as Finished Products ... e Allied Substances US$ 200.00 ... 6. Renewal of Marketing Authorisation for Medicines or Allied Substances Imported as Finished Products ... e Allied Substances US$ 350.00 ... 7. Amendment Fees for Medicines and Allied Substances Imported as Finished Products a Minor amendment US$ 100.00 b Major amendment US$ 500.00' and 'l Fast track fees Double the applicable MA applicable fee'. S.I. No. 38 of 2016 Part III agrees ('Application for Marketing Authorisation Allied Substances imported as finished products (a) Allied Substances 500').

Label, IFU & language

Which label and IFU elements, languages, symbols, and translation controls apply?

Compare countries

Label and IFU content follows GHTF/SG1/N70:2011; consumer packaging must be labelled primarily in English

label.english-labelling-and-ghtf-content
Fact-level verified
Statement

Device labelling content and instructions for use are governed by ZAMRA's Guidelines for Label and Instructions for Use for Medical Devices, an adaptation of the GHTF document GHTF/SG1/N70:2011. An application must include at least two samples of the device in the smallest commercial pack size labelled primarily in English, sample instructions for use and a mock-up label; applications and supporting documents must be in English. The label should carry the name or trade name of the device, details necessary to identify the device and its use, the name and address of the manufacturer, and, for imported devices, the name and postal address of the authorised representative, importer or distributor established in the importing country, which may be added by that party without obscuring the manufacturer's labels. The guideline recognises that a regulatory authority may authorise labelling in one or more languages other than its national language provided safe and correct use is ensured, and encourages the use of internationally recognised symbols.

Conditions
  • Labelling is a separate dossier chapter (Chapter 5) in the non-IVD table of contents.
  • The Annex I form requires a sample label (mock-up), sample instructions for use, and the storage conditions, shelf life and intended user.
  • GMDN code, lot number and UDI are required in the device description, so the label content items are tied to the dossier data set.

Verbatim: 'For imported devices, the name and postal address of the authorised representative, or importer or distributor established within the importing country/jurisdiction may be required. This information may be added by the authorised representative, importer, or distributor within the country of import, rather than be provided by the manufacturer, in which case, the additional label should not obscure any of the manufacturer's labels.' and 'Provided that safe and correct use of the device is ensured, a RA may authorise labelling to be in one or more language(s) other than its national language(s).' Non-IVD guideline: 'At least two samples of the non in-vitro medical device packaged in the smallest commercial pack size, and labelled primarily in English'.

Manufacturer PMS

Which PMS plan, report, PMCF or PMPF, trend, and lifecycle-update duties apply?

Compare countries

Post-market surveillance history is a premarket disclosure item and the holder carries the post-market duty

pms.post-market-surveillance-disclosure-and-holder-duty
Fact-level verified
Statement

Applicants must disclose their post-market record as part of the dossier: the Annex I form asks whether there have been previous recalls, reportable adverse incidents, banning in other countries or post-market surveillance studies, requires details of each item ticked, and requires any relevant documentation to be attached, and the Chapter 2 Submission Context block requires global market history including global incident reports and recalls and sales, incident and recall rates. Once authorised, the marketing authorisation holder must put in place a vigilance system to monitor the quality, safety and performance of the device on the Zambian market and ensure that modalities to provide routine reports to the Authority on any findings regarding the product are in place (non-IVD guideline s.1(p)); the holder must also pay the annual retention fee by 31 December each year, failing which importation is not authorised and the authorisation is suspended and may be revoked (s.1(o)), and is the addressee of suspension or revocation notices.

Conditions
  • The non-IVD guideline imposes a vigilance-system and routine-reporting duty on the MAH but fixes no reporting cadence or deadline.
  • The recall guideline defines 'product' to include a medicine and an allied substance, so device recalls fall within it.

Verbatim: 'Have there been any of the following: Previous recalls / Reportable adverse incidents / Banning in other countries / Post-market surveillance studies. Please provide details on each item you have ticked (attach any relevant documentation)'. Annex IV: '2.06 Global Market History / 2.06.02 Global Incident Reports and Recalls / 2.06.03 Sales, Incident and Recall Rates'.

Official forms & portals

Which current form, portal, account, and submission package must be used?

Compare countries

Annex 1 application form with Annex 2 checklist; dossier filed through the ZAMRA online portal

forms.application-form-and-online-portal
Fact-level verified
Statement

The device application uses the application form set out in Annex 1 of the guideline and the checklist set out in Annex 2, which must be completed indicating the sections of the application completed and their page numbers. The dossier is presented in electronic text-selectable/editable PDF and submitted via the Authority's online portal.

Conditions
  • The form must be signed and dated by the authorised person on behalf of the applicant, with the company seal or official stamp (Annex I Part III).
  • The IVD guideline instead requires the completed application forms to be accompanied by one hard copy and one soft copy of the complete product dossier, and states that 'All applications shall be physically delivered to the Authority' (s.1.4.1) — the two device pathways differ in filing channel.
  • Applications and supporting documents must be in English, presented in 12-point Times New Roman or Arial at 1.5 line spacing with pages numbered sequentially (s.1(e)-(f)).

Verbatim: 'An applicant shall submit an application as provided in these guidelines that shall be accompanied by a product dossier that is presented in an electronic text selectable/editable PDF, submitted via the Authority's online portal.' and 'Information shall be presented in legible letters of 12 font size in Times New Roman or Arial font type of 1.5 line spacing and standard margin.'

QMS, audit & inspection

Which QMS, audit, inspection, and certificate scope is accepted or required?

Compare countries

ISO 13485 conformity evidenced by site audit or GMP inspection, with gazetted inspection fees

qms.iso-13485-site-audit-and-gmp-certification
Fact-level verified
Statement

An applicant must facilitate site audits of its manufacturing site to demonstrate compliance with ISO 13485, and the GMP inspection fees in the Medicines and Allied Substances (Fees) Regulations apply to a site audit. In deciding whether to conduct a site audit the Authority may take into account previous satisfactory site audit outcomes from well-resourced or regional regulatory agencies conducted within 24 months. For IVDs, the Authority may carry out a risk-based GMP inspection of a manufacturing site using cGMP guidelines, with a fee separate from the marketing authorisation application fee, and must consider previous satisfactory inspection reports from ZAMRA or other recognised competent authorities where it cannot inspect itself. Documentary proof of ISO 13485 compliance and an ISO 13485 certificate are mandatory dossier items, and the grant of IVD marketing authorisation requires the Authority to be satisfied that the product is manufactured in compliance with cGMP requirements.

Conditions
  • The non-IVD dossier also requires a quality management system certificate, a full quality system certificate or other regulatory certificates as an administrative item, and the Annex I form asks for a certified copy where available.
  • ZAMRA's published fee schedule sets GMP inspection fees for foreign-based manufacturers by region: Southern Africa US$3,500, rest of Africa US$5,000, Far East/Asia US$6,500, Europe/America/Australia US$7,500, additional production line US$1,500 and GMP document evaluation (desk audit) US$3,500 per manufacturing site; local manufacture inspection for issue of a GMP certificate is ZMW 6,000.

Verbatim: 'An applicant shall be required to facilitate for site audits of their manufacturing site in order to demonstrate compliance to ISO 13485. The GMP inspection fees set out in the Medicines and Allied Substances (Fees) Regulations, 2016 shall apply in relation to a site audit.'

Recall, FSCA & market surveillance

Which recall, FSCA, notice, and authority-coordination duties apply?

Compare countries

Class I: public notified within 24 hours, undistributed stock quarantined immediately, recall completed within 72 hours (s.6.2.4)

recall.class-i-24h-public-notification
Fact-level verified

For a Class I recall, the MAH, local responsible person, distributor and manufacturer must notify the public within 24 hours of the recall decision, quarantine undistributed stock immediately, and complete the recall within 72 hours. A problem that may lead to a Class I or II recall must be reported to ZAMRA by telephone within 24 hours (Appendix II note).

Conditions
  • Class I recalls only for the 24-hour public notification; the 24-hour telephone report applies to potential Class I or II recalls.

Effective from 2023-03-01

Reporting uses the Pharmaceutical Product Reporting Form (Part I) and Recall Notification Form (Part II) in Appendix II, also posted on the ZAMRA Forms page.

Recalls are classified I, II or III by ZAMRA; Classes I and II are urgent safety-related recalls

recall.classification-authority-decides
Fact-level verified

Recalls are classified by severity into Class I, II and III. Class I and II are 'Urgent Safety-Related Recalls' that must be reported to ZAMRA for evaluation; Class III are minimum-risk recalls that must nevertheless be reported. ZAMRA determines the class of each recall, and for international recalls it considers decisions of other national regulatory agencies.

Effective from 2023-03-01

Table 1 gives examples per class (Class I: serious/life-threatening defects; Class III: non-compliance with the Act's quality, safety or efficacy requirements).

Non-adherence to the Recall Guideline is prosecuted under s.46(4) MASA (s.9.0)

recall.guideline-non-adherence-penalty
Fact-level verified

Where there is non-adherence to the Recall Guideline, ZAMRA institutes regulatory action and prosecution in accordance with s.46(4) of the Medicines and Allied Substances Act (fine up to one million penalty units and/or up to three years' imprisonment).

Effective from 2023-03-01

The 2023 Recall Guideline covers allied substances, expressly including medical devices, and both voluntary and statutory recalls

recall.guideline-scope-includes-devices
Fact-level verified

ZAMRA's Guideline on Recall of Medicines and Allied Substances (March 2023) applies to all quality-defect reports and safety/efficacy incidents for medicines and allied substances, and to local responsible persons, MAHs, distributors, manufacturers, wholesalers, retailers, health facilities and the public; its definitions state that allied substances include medical and surgical sundries, medical devices and condoms.

Effective from 2023-03-01

Guideline is dated 'MARCH, 2023' on its cover; exact day not stated. The guideline also defines 'Correction' (repair, modification, adjustment, re-labelling or inspection without physical removal), the FSCA-type action.

Recall initiation and physical-recall timelines by class (Table 3)

recall.initiation-completion-timelines
Fact-level verified

Recalls must be initiated within 24 hours (Class I), 48 hours (Class II) or 72 hours (Class III), and physically completed within 72 hours (Class I), 14 days (Class II) or 30 days (Class III).

Effective from 2023-03-01

Section 1.4 (Table 2) separately defines recall levels A (consumer), B (retail/user facility) and C (wholesale).

Inspectors may enter, search, seize products and take samples under warrant (s.55(4) MASA)

recall.inspector-seizure-sampling-powers
Fact-level verified

A ZAMRA inspector may, on the authority of a warrant, enter premises or conveyances believed to be used contrary to the Act and, among other powers, seize any medicine or allied substance (and related records or devices) that bears on an inspection or investigation or is used contrary to the Act, and take samples for testing, examination or analysis.

Conditions
  • Entry requires a warrant and reasonable grounds (s.55(4)).

Effective from 2013-03-22

Market-surveillance enforcement power; s.55(5) requires a receipt for anything removed.

Interim report within 7 days, final report within 14 days, investigation/CAPA report within 30 days of the recall (s.6.2.6)

recall.interim-final-investigation-reports
Fact-level verified

The MAH, local responsible person, distributor or manufacturer must give ZAMRA an interim progress report within 7 calendar days of initiating the recall, a final report within 14 calendar days of commencing it (or obtain ZAMRA's approval for a later date), and a report on the investigation results and preventive action not more than 30 calendar days after the recall.

Effective from 2023-03-01

Final report content: circumstances, action taken, distribution extent in and outside Zambia, quantities returned/outstanding, confirmation of retailer returns, and method of destruction. Appendix IV provides the Post Recall Report Form.

Voluntary recall notices must be approved by ZAMRA before publication; statutory notices issue under s.46 (s.5.1)

recall.notice-approval-before-publication
Fact-level verified

A statutory recall notice is issued under s.46 of the Act. For a voluntary recall, the MAH, local responsible person, distributor or manufacturer must submit a draft notice with a factual statement of reasons and product identifiers to ZAMRA for approval before publication; the notice may not contain promotional material.

Effective from 2023-03-01

s.5.2 adds that for Class I/II recalls a media release (public warning) headed 'Urgent Medicine/Allied Substance Recall' is used.

Recall/withdrawal may be regulated by statutory instrument, and ZAMRA guidelines are binding once published (ss.68-69 MASA)

recall.regulation-and-guideline-powers
Fact-level verified

The Minister may by statutory instrument make regulations on the recall or withdrawal of medicines and allied substances that do not meet prescribed quality, efficacy and safety standards (s.69(2)(g)); separately, guidelines made by ZAMRA under s.68 become binding on all regulated persons upon publication in a daily newspaper of general circulation.

Effective from 2013-03-22

The 2023 Recall Guideline cites s.46 and s.68 as its legal basis (Guideline s.1.0).

Selling a product subject to a recall notice is an offence (s.46(3)-(4) MASA)

recall.sale-of-recalled-product-offence
Fact-level verified

No person may sell a medicine or allied substance that is the subject of a s.46(1) recall notice; contravention is an offence punishable on conviction by a fine of up to one million penalty units, imprisonment of up to three years, or both.

Effective from 2013-03-22

The Recall Guideline (s.9.0) states that non-adherence to the guideline is prosecuted under s.46(4).

ZAMRA may direct the return (recall) of a medicine or allied substance by written notice or Gazette (s.46(1)-(2) MASA)

recall.statutory-recall-power
Fact-level verified

Where ZAMRA determines it is not in the public interest that a medicine or allied substance be made available to the public, it may by written notice served on any person, or by Gazette notice, direct that person to return the product to the manufacturer, to the importer (for imported products) or to the Authority or its designee, and may direct the manufacturer or importer how to deal with or dispose of the returned stock.

Conditions
  • Applies to any medicine or allied substance, which includes medical devices (s.2).

Effective from 2013-03-22

Marginal note reads 'Recall of medicine, etc. from circulation'.

Circumstances in which ZAMRA triggers a statutory (mandatory) recall (s.2.2)

recall.statutory-recall-triggers
Fact-level verified

ZAMRA triggers a statutory recall where a medicine or allied substance does not meet the set standard of quality, safety and efficacy; where continued supply violates the Act or another law; or where the Authority determines that continued availability is not in the public interest. Voluntary recalls (s.2.1) are triggered by the MAH/manufacturer on quality, complaint, stability or serious-safety-risk findings.

Effective from 2023-03-01

Definition on p.5: 'Mandatory (non-voluntary) recall: Is when the Authority requests/orders a product recall due to non-compliance to regulatory requirements.'

Registration pathways

Which registration, notification, listing, reliance, or conformity route applies?

Compare countries

Marketing authorisation is applied for per device through an Annex 1 application form and a product dossier

registration.marketing-authorisation-application
Fact-level verified
Statement

A person who intends to place a non in-vitro medical device on the Zambian market must apply to ZAMRA for marketing authorisation. The application comprises a cover letter, a duly completed and signed application form (Annex 1), proof of payment of the prescribed application fee, at least two samples of the device in the smallest commercial pack size labelled primarily in English, a completed Annex 2 checklist, and the product dossier. Where a product has variants such as size, design, dimensions or capacity the variants are treated as different products and require separate applications. An incomplete application is not accepted if any of those six items is missing. The dossier is presented as an electronic text-selectable/editable PDF submitted via the Authority's online portal, and for IVDs one hard copy and one soft copy are required.

Conditions
  • The dossier table of contents runs to six chapters: Administrative, Submission Context, Non-clinical Evidence, Clinical Evidence, Labelling, and Quality Management System (procedures and device-specific).
  • Class A devices file a shorter technical package (Annex II) than classes B to D, which file the full Chapters 1-6 table of contents.
  • IVD applications must be physically delivered to the Authority; the non-IVD guideline requires submission through the Authority's online portal.

Verbatim: 'An Application shall comprise the following: (i) Cover letter from the applicant; (ii) A duly completed and signed application form set out in Annex 1; (iii) Proof of payment of the prescribed application fee; (iv) At least two samples of the non in-vitro medical device packaged in the smallest commercial pack size, and labelled primarily in English; (v) A duly completed checklist as set out in Annex 2 ...; and (vi) Product dossier.'

Reliance & recognition

Which foreign decisions or evidence can be reused, with what effect and conditions?

Compare countries

Existing records include acceptance, restrictions and evidence reuse. The applicable product scope and conditions are preserved below; a reference does not by itself confer market access.

Zambia approvals and evidence in other markets (0 records)

No linked record is currently maintained. This does not establish that a pathway is unavailable.

Prior approvals and evidence for Zambia (7 records)

ZambiaSource authority not specified

Prior approval / evidence record

ZAMRA or another recognised competent authority GMP inspection report for the same manufacturing site

Authority

ZAMRA or another recognised competent authority GMP inspection report for the same manufacturing site

Accepted

Yes

Benefit

Abridges the site-inspection step rather than the dossier review: for IVDs the Authority 'shall consider' and for non-IVDs it 'may consider' a previous satisfactory inspection report of the site, provided the inspection was conducted within 24 months preceding receipt of the application.

Maintained reference · planning ranges remain estimates · reviewed 2026-09-16

ZambiaNMPA

Prior approval / evidence record

China NMPA medical device registration certificate or Class I filing record

Authority

China NMPA medical device registration certificate or Class I filing record

Accepted

No

Benefit

No route. The NMPA is not among the approvals the Annex I form asks the applicant to disclose, and no recognition procedure in the non-IVD or IVD guideline names it. An NMPA certificate may be filed as documentary proof of registration in other countries, which carries no procedural benefit, and it cannot substitute for the Free Sale Certificate, which must be addressed to Zambia from the manufacturer's own authority.

Maintained reference · planning ranges remain estimates · reviewed 2026-09-16

ZambiaWHO · US FDA · EU conformity assessment · IMDRF member authorities

Prior approval / evidence record

Foreign approval (WHO PQ, US FDA, CE mark, IMDRF member state, SADC registration) is disclosed on the application form but opens no stated route

reliance.foreign-approval-disclosure-no-stated-route
Fact-level verified
Edge Type

Origin Country Evidence

Market Access Strength

Evidence Only

Source Approval

Disclosure of marketing approval in a SADC state, WHO Prequalification, US FDA approval, CE marking, or approval in any IMDRF member state

Statement

ZAMRA's device application form requires the applicant to disclose its foreign approvals: it must list the SADC states where the medical device has obtained marketing approval, attaching documentation, and state whether the device is WHO prequalified, US FDA approved, CE marked or approved in any IMDRF member state, attaching valid documentation. A separate dossier item requires documentary proof of registration of the product in other countries, specifically those in the SADC region. None of these approvals, however, gives a shortened or substitute route in the guidelines: the non-IVD guideline states only that an application 'shall be evaluated on a first come first serve basis unless expedited evaluation has been authorised by the Authority', and neither the non-IVD nor the IVD guideline provides that a WHO, FDA, CE or IMDRF approval triggers that authorisation or replaces any part of ZAMRA's assessment. An FDA or CE holder therefore still files the full ZAMRA dossier and obtains a Zambian marketing authorisation on ZAMRA's own evaluation. This is disclosure and evidence, not reliance.

Regulatory Layer

Product Marketing

Local Application Required

Yes

Target Decision Retained

Yes

Conditions
  • The approval information is a mandatory field on the Annex I application form, so withholding it is not an option; but the guidelines attach no procedural consequence to holding or not holding it.
  • 'Expedited evaluation' is defined in the non-IVD guideline as 'the express evaluation of a product application within a 90 - day period'; the Authority authorises it and the guideline states no criteria, so reliance on a foreign approval as the trigger is aspirational rather than an operating rule.
  • ZAMRA's published fee schedule carries a 'Fast track fees' head at 'Double the applicable MA applicable fee', confirming that a fast track exists commercially but again without stating a foreign-approval trigger.
  • The same absence holds for IVDs: the IVD guideline (ZAMRA/MA/GUD/0003) has no recognition or abridged procedure based on a foreign marketing authorisation, although it defines a 'Fast Track process' as 'the authorised expedited evaluation or assessment of an application submitted for the purpose of grant of Marketing Authorisation'.

Effective from 2024-06-21

Verbatim from Annex I: 'List the SADC states where the medical device has obtained marketing approval (Attach documentation)' and 'Is the device WHO prequalified, US FDA approved, CE Marked or approved in any IMDRF member state? If so attach valid documentation'. Non-IVD guideline section 1(i): 'An application shall be evaluated on a first come first serve basis unless expedited evaluation has been authorised by the Authority.' Definition: '“expedited evaluation” means the express evaluation of a product application within a 90 – day period'.

ZambiaSource authority not specified

Prior approval / evidence record

An original Free Sale Certificate addressed to Zambia, the manufacturing licence and proof of foreign registration are mandatory dossier items

reliance.free-sale-certificate-and-foreign-registration-mandatory
Fact-level verified
Edge Type

Origin Country Evidence

Market Access Strength

Evidence Only

Source Approval

An original Free Sale Certificate addressed to Zambia from the manufacturer home authority, plus the manufacturing licence and documentary proof of foreign registration

Statement

A foreign manufacturer cannot file a Zambian device application without its home-country paper: the applicant must provide an original Free Sale Certificate specifically addressed to Zambia (notarized copies are acceptable), the manufacturing licence of the device manufacturer, documentary proof of compliance with ISO 13485, and documentary proof of registration of the product in other countries, specifically those in the SADC region. The Annex II dossier checklist requires an original or notarized Free Sale Certificate, a notarized manufacturing licence, notarized registration certificates and an ISO 13485 certificate. The Free Sale Certificate / certificate of marketing authorisation is also a standing Administrative chapter item. This is a mandatory evidence requirement that runs alongside the full ZAMRA evaluation - it does not replace it, and it does not by itself give the holder an abridged review.

Regulatory Layer

Product Marketing

Local Application Required

Yes

Target Decision Retained

Yes

Conditions
  • The Free Sale Certificate must be addressed specifically to Zambia; a generic home-country certificate is not sufficient on the face of the guideline.
  • The requirement applies to both IVDs and non-IVDs: the IVD Annex checklist lists 'Original or notarized Free Sale Certificate', 'Notarized Manufacturing Licence', 'Notarized Registration Certificates' and 'ISO 13485 certificate' under Certificates.
  • Registration elsewhere is required to be evidenced; the guideline asks for registration in other countries 'specifically those in the SADC region', which is a disclosure requirement rather than a mutual-recognition route.

Effective from 2024-06-21

Verbatim: '5. Certificates. Provide: a) original Free Sale Certificate specifically address to Zambia (notarized copies are acceptable) b) Manufacturing Licence of the device manufacturer c) Documentary proof of compliance to ISO 13485 d) Documentary proof of registration for the product in other countries specifically those in the SADC region'. Annex II checklist: 'Certificates - Original or notarized Free Sale Certificate / Notarized Manufacturing Licence / Notarized Registration Certificates / ISO 13485 certificate'.

ZambiaIMDRF member authorities · WHO · US FDA · EU conformity assessment

Prior approval / evidence record

WHO Prequalification; US FDA approval; EU CE marking; approval in any IMDRF member state

Authority

WHO Prequalification; US FDA approval; EU CE marking; approval in any IMDRF member state

Accepted

No

Benefit

Disclosure only. The Annex I application form requires the applicant to state whether the device is WHO prequalified, US FDA approved, CE marked or approved in any IMDRF member state and to attach valid documentation, but neither the non-IVD nor the IVD guideline attaches any procedural consequence — no shortened clock, no abridged dossier and no substitute for ZAMRA's own evaluation.

Maintained reference · planning ranges remain estimates · reviewed 2026-09-16

ZambiaSource authority not specified

Prior approval / evidence record

Marketing approval in a SADC state

Authority

Marketing approval in a SADC state

Accepted

No

Benefit

Disclosure only. The application must list the SADC states where the device has obtained marketing approval and the dossier must include documentary proof of registration in other countries, specifically those in the SADC region. No SADC approval abridges the Zambian evaluation; there is no SADC device approval to rely on.

Maintained reference · planning ranges remain estimates · reviewed 2026-09-16

ZambiaSource authority not specified

Prior approval / evidence record

A satisfactory foreign GMP / site-audit report from a recognised competent authority issued within 24 months may replace a ZAMRA inspection

reliance.foreign-inspection-report-recognition
Fact-level verified
Edge Type

Qms Audit Reliance

Market Access Strength

Evidence Only

Source Approval

A previous satisfactory GMP inspection report for the manufacturing site issued by ZAMRA or another recognised competent authority within the 24 months preceding receipt of the application

Statement

Where ZAMRA cannot conduct a GMP inspection of a device manufacturing facility, it shall consider previous satisfactory inspection reports of that site conducted by ZAMRA or other recognised competent authorities, provided the inspection was conducted within twenty-four months preceding receipt of the application. In the non-IVD guideline the same mechanism is permissive: in determining whether to conduct a site audit for ISO 13485 compliance, the Authority may consider previous satisfactory site audit outcomes conducted by well-resourced or regional regulatory agencies and that the audit was conducted within 24 months preceding receipt of the application. This is the one place where ZAMRA's device guidelines expressly rely on another regulator's work product, and it bears only on the manufacturing-site inspection, not on the product evaluation.

Regulatory Layer

Qms Audit

Local Application Required

Yes

Target Decision Retained

Yes

Conditions
  • The reliance is on an inspection report, not on a marketing approval; it does not abridge the dossier review or the technical committee decision.
  • For IVDs the clause is mandatory in terms ('shall consider') where the Authority cannot conduct the inspection; for non-IVDs it is discretionary ('may ... consider').
  • The report must be no more than 24 months old at the date the application is received.
  • ZAMRA publishes GMP inspection fees for foreign-based manufacturers, including desk audits: full site in Southern Africa US$3,500, rest of Africa US$5,000, Far East/Asia US$6,500, Europe/America/Australia US$7,500, additional production line US$1,500 and GMP document evaluation (desk audit) US$3,500 per manufacturing site.
  • Recorded as qms_audit_reliance using the registry token already in use for MDSAP GMP recognition edges (Australia, Mexico, South Korea), with regulatoryLayer qms_audit; the mechanism abridges the site-inspection step, not the dossier review.

IVD guideline verbatim: 'Where the Authority cannot conduct a GMP inspection it shall consider previous satisfactory inspection reports of the site/facility conducted by ZAMRA or other recognised competent Authorities, provided that the inspection was conducted within twenty four (24) months preceding receipt of the application.' Non-IVD guideline verbatim: 'The Authority may in determining whether to conduct a site audit of a manufacturing site referred to in (i) consider: (a) previous satisfactory site audit outcomes conducted by well-resourced or regional regulatory agencies; and (b) that the audit in (ii) was conducted within 24 months preceding receipt ...'

Review clocks

What review, validation, and applicant stop-clock rules apply?

Compare countries

IVD applications evaluated within 180 working days; expedited evaluation defined as a 90-day period; 60 to 90 days to answer deficiency requests

review-clocks.evaluation-and-response-times
Fact-level verified
Statement

For IVDs, all new applications shall be evaluated within 180 working days from the date of receipt in the order of submission, and the applicant shall be requested to provide additional data within 90 working days of such a request, with any extension requiring a written request within 14 days of receipt of the request, approved by the Authority. For non-IVDs, an application is evaluated on a first-come-first-served basis unless expedited evaluation has been authorised, and 'expedited evaluation' is defined as the express evaluation of a product application within a 90-day period; where a deficiency request is issued, the applicant must respond within a period specified by the Authority not exceeding 60 days, failing which the application is rejected. If unresolved safety or quality issues remain on an IVD, the Technical Committee defers recommendation and refuses approval if the applicant fails to provide the required data within 90 days.

Conditions
  • The non-IVD guideline sets no overall evaluation clock, only the 90-day definition of expedited evaluation and the 60-day maximum response period.
  • The clock runs in the order of submission, so the 180-working-day IVD clock is a queue-inclusive figure rather than a pure assessment time.
  • Response deadlines are enforced: failure to respond within the stated period results in rejection (non-IVD) or closure of the application, to be refiled as a new application (IVD).

Verbatim: '1.10.1 Evaluation of new application. All applications shall be evaluated within one hundred and eighty (180) working days from the date of receipt in the order of submission. The applicant shall be requested to provide additional data when required within ninety (90) working days of such a request.' Non-IVD: '“expedited evaluation” means the express evaluation of a product application within a 90 – day period' and 'an applicant shall be required to submit all the requested additional information within the period specified by the Authority but not exceeding 60 days from the date of receipt of the request'.

Special access & derogation

Is an emergency, compassionate, custom, humanitarian, or other exceptional path available?

Compare countries

Emergency authorisation to manufacture or import a generic of a patented medicine or allied substance (s.57 MASA)

special.emergency-generic-authorisation
Fact-level verified

Where the Minister declares a national health emergency or state of extreme urgency, where the public interest so requires, or where a product is needed for public non-commercial use, ZAMRA may authorise local manufacture or importation of a generic formulation of a medicine or allied substance notwithstanding a Zambian patent; the authorisation cannot exclude the patent holder and is subject to court review.

Conditions
  • Triggers: declared national health emergency / extreme urgency, public interest, or public non-commercial use.
  • Authorisation is subject to review by a court (s.57(3)).

Effective from 2013-03-22

This is a patent-override (compulsory-use) power triggered by emergencies rather than a product-approval waiver; the marketing-authorisation waiver for a declared health emergency sits in s.39(4)(e).

Statutory exemptions from the marketing-authorisation requirement (s.39(4) MASA)

special.marketing-authorisation-exemptions
Fact-level verified

Section 39(4) of the Medicines and Allied Substances Act 2013 lists the cases to which the marketing-authorisation requirement of s.39(1) does not apply: donated medicines; personal or relative's use on prescription; import by a physician, dentist or veterinary surgeon on prescription; pharmacist-compounded medicine; medicine imported or exported in response to a declared health emergency; medicine imported by an authorised institution for its patients; and any medicine or allied substance used for a clinical trial.

Conditions
  • Limbs (a)-(f) are drafted in terms of 'medicine'; only limb (g) (clinical trial) expressly says 'medicine or allied substance'. Medical devices are 'allied substances' under s.2, so the application of limbs (a)-(f) to devices is not explicit on the face of the Act.

Effective from 2013-03-22

s.2 defines 'allied substances' to include 'medical and surgical sundries, medical devices and condoms'. s.39(1) itself applies to 'any medicine or allied substance'.

Personal-use import permit for a medicine or allied substance (SI 57 of 2017, reg. 4)

special.personal-use-import-permit
Fact-level verified

A person who intends to import any medicine or allied substance for personal use must apply to ZAMRA for a permit in Form II of the Schedule to SI 57 of 2017 and pay the prescribed fee. 'Personal use' includes use by the person's relative or animal.

Conditions
  • Applies to importation for personal use only; commercial imports use the reg. 3 / Form I permit.

Effective from 2017-07-28

Read from the gazette scan via OCR; reg. 4(2) separately provides for the Authority to notify its decision, and reg. 7(2) for issue of the permit in Form VI.

Travellers carrying prescribed medicine or allied substance for own use are exempt from the permit regime (SI 57 of 2017, reg. 13)

special.traveller-exemption
Fact-level verified

The Importation and Exportation Regulations do not apply to a traveller entering Zambia with a medicine or allied substance for the traveller's own use, provided the traveller furnishes the port-of-entry inspector with written confirmation from the competent authority of the prescribing country that the product was prescribed for the traveller.

Conditions
  • Own use only; written confirmation from the foreign competent authority must be produced at the port of entry.

Effective from 2017-07-28

'competent authority' is defined in reg. 2 as the medicines and allied substances regulatory authority of the country where the product was prescribed.

Standards, testing & ancillary approvals

Which standards, tests, and radio, electrical, metrology, or other overlays are triggered?

Compare countries

Samples may be analysed by the National Drug Quality Control Laboratory or a recognised laboratory against claimed specifications

testing.ndqcl-laboratory-analysis
Fact-level verified
Statement

Where necessary, samples of a non in-vitro medical device may be analysed by the National Drug Quality Control Laboratory (NDQCL) against the manufacturer's claimed specifications in accordance with available local standards or other quality specifications such as those prescribed by the International Organization for Standardization and any other internationally recognised standards. For IVDs, the Authority's NDQCL or an appropriate laboratory recognised by the Authority may test sample devices, with the number of samples determined and requested by the NDQCL, and the laboratory's test report forms part of the evaluation process. 'Recognised standards' are defined in the guidelines as national or international standards accepted to offer conformity to specific essential principles of safety and performance. The dossier requires two certificates of analysis for each device.

Conditions
  • Marketing authorisation fees cover the cost of evaluating the initial submission only and exclude laboratory testing and site audit fees, which are charged separately.
  • An IVD marketing authorisation is granted only when the Authority is satisfied with the findings of the laboratory analysis where applicable.
  • The Essential Principles of Safety and Performance of Medical Devices document is the reference against which conformity, including via consensus standards, is assessed.

Verbatim: 'Where necessary, samples of the non in-vitro medical device may be analyzed by the National Drug Quality Control Laboratory (NDQCL) against the claimed manufacturer's specifications in accordance with the current available local Standards or other quality specifications such as those prescribed by International Organisation for Standardisation (ISO) and any other internationally recognised standards.'

Submission communications & appeal

How are deficiencies answered, clocks handled, and decisions escalated or appealed?

Compare countries

Deficiency requests, rejection for non-response, and refiling as a new application

submission.deficiency-rejection-and-refiling
Fact-level verified
Statement

ZAMRA screens an application before evaluation. Where deficiencies are identified during screening of a non-IVD application, a request for additional information is made to the applicant, who must supply it within a period specified by the Authority but not exceeding 60 days; failure to respond, or an incomplete, deficient or immaterial response, results in rejection, and the applicant is informed in writing. For IVDs, where the applicant fails to submit additional information within the stipulated time the Authority closes the application, and if the applicant wishes to resubmit, the application is processed as a new application. Evaluation of an IVD application that the Technical Committee defers for unresolved safety or quality issues is refused if the required data is not provided within 90 days. An applicant aggrieved by a decision on its application may seek redress in accordance with the Act (non-IVD s.1(m)): under section 56 of the Act a person aggrieved by a decision of the Authority may appeal to the Minister within thirty days, the Minister must decide within ninety days, and a further appeal lies to the High Court within thirty days.

Conditions
  • The non-IVD guideline provides no appeal procedure of its own; it refers to the Act, whose s.56 appeal to the Minister and then the High Court is the remedy.
  • The non-IVD guideline provides that an application must be complete on filing - it is not accepted if any one of the six required items is missing.
  • The IVD guideline requires all applications to be physically delivered to the Authority and entered into the Authority's record systems upon confirmation of payment.

Verbatim: 'Where deficiencies are identified during screening of an application, a request for additional information shall be made to the applicant. ... an applicant shall be required to submit all the requested additional information within the period specified by the Authority but not exceeding 60 days from the date of receipt of the request. ... Where an applicant does not respond ... the application shall be rejected.' IVD guideline: 'Where the applicant fails to submit additional information within the stipulated time, the Authority shall close the application. Should the applicant wish to resubmit the application, the application shall be processed as a new application.'

UDI, listing & traceability

Which UDI, device listing, database, and traceability duties apply?

Compare countries

GMDN code, lot number and UDI are required data elements in the device description

udi.gmdn-lot-and-udi-in-dossier
Fact-level verified
Statement

The device description required with a ZAMRA application must include the material of construction for the device and for packaging material where applicable, the device dimensions, and the GMDN code, lot number and UDI. ZAMRA also publishes a register of valid, expired and withdrawn marketing authorisations for allied substances, and a separate guideline on traceability of medicines exists but is not drafted for devices. No UDI issuing-agency designation, UDI database or UDI submission obligation for devices was found in the ZAMRA device guidelines.

Conditions
  • The UDI appears as a dossier data element in the device description rather than as a separate labelling-identifier submission.
  • The traceability guideline published by ZAMRA is titled 'Guidelines of Traceability of Medicines' and its scope is medicines, so it is not cited here as a device traceability instrument.

Verbatim: '3. ... should also include the following: a) material of construction for: (i) the device (ii) packaging material where applicable b) device dimensions c) GMDN Code, Lot No. and UDI'.

Vigilance & incident reporting

What is reportable, by whom, where, in what format, and by what deadline?

Compare countries

Recalls of medicines and allied substances, including devices, follow the ZAMRA recall guideline

vigilance.recall-and-adverse-incident-reporting
Fact-level verified
Statement

ZAMRA's Guideline on Recall of Medicines and Allied Substances (March 2023) defines 'allied substances' by reference to section 3 of the Act, which includes medical devices, and defines 'product' to include a medicine and an allied substance; 'recall' is a process for withdrawing or removing a medicine and/or allied substance from the market. The guideline is made under the Medicines and Allied Substances Act No. 3 of 2013, under which the Authority regulates and controls medicines and allied substances and establishes, maintains and enforces standards. For non-IVD devices the marketing authorisation holder must operate a vigilance system and provide routine reports to the Authority (non-IVD guideline s.1(p)).

Conditions
  • The recall guideline is not device-specific; it applies to allied substances, which is the statutory category into which medical devices fall.
  • The Annex I application form requires applicants to disclose reportable adverse incidents and banning in other countries as part of the premarket dossier.
  • No device-specific adverse-event reporting timeframe or field safety corrective action procedure was found in the retrieved ZAMRA device guidelines; the vigilance duty in s.1(p) is stated without a cadence.

Verbatim: 'Allied Substances: Include acaricides, cosmetics, disinfectants, food supplements, feed additives and supplements, medical and surgical sundries, medical devices and condoms ... section 3 of the Medicines and Allied Substances Act No. 3 of 2013 of the Laws of Zambia' and 'Recall: A process for withdrawing or removing a medicine and/or allied substance' and 'Product: Includes a medicine and an allied substance'.

Related structured datasets

Classification systems · 2 records
Open ZAMRA Classes A, B, C and D — in-vitro diagnostic devices
Id

zambia:ivd

Jurisdiction Id

zambia

Domains
  • ivd
Name

ZAMRA Classes A, B, C and D — in-vitro diagnostic devices

Description

Zambia classifies IVDs on a parallel four-class system based on individual and public-health risk, published in the ZAMRA guideline for Grant of Marketing Authorisation of In-Vitro Diagnostic Devices for Human Use (ZAMRA/MA/GUD/0003): Class A low individual and low public-health risk, Class B moderate individual and/or low public-health risk, Class C high individual and/or moderate public-health risk, Class D high individual and high public-health risk. The IVD guideline excludes in-vitro diagnostics for veterinary use.

Classes
  • Id

    a

    Label

    Class A — low individual and low public-health risk

    Normalized Risk Level

    low

  • Id

    b

    Label

    Class B — moderate individual and/or low public-health risk

    Normalized Risk Level

    medium

  • Id

    c

    Label

    Class C — high individual and/or moderate public-health risk

    Normalized Risk Level

    high

  • Id

    d

    Label

    Class D — high individual and high public-health risk

    Normalized Risk Level

    highest

Regulator

Zambia Medicines Regulatory Authority

Official Domains
  • zamra.co.zm
Source Status

official-source-verified

Reference Sources
  • Title

    ZAMRA IVD guideline section 1.14 and the IVD risk-band table

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/Guidelines-for-grant-of-Marketing-Authorisation-of-in-vitro-diagnostic-devices-for-Human-use.pdf

    Reviewed On

    2026-09-16

    Supports

    The IVD class axis is the Authority's own published risk-band table rather than an imported GHTF document, and IVD applications are filed physically with the Authority — the two device pathways differ in both classification wording and filing channel.

Source Title

ZAMRA, Guidelines for Grant of Marketing Authorisation of In-Vitro Diagnostic Devices for Human Use (ZAMRA/MA/GUD/0003, version 1.0)

Source Url

https://www.zamra.co.zm/wp-content/uploads/2026/06/Guidelines-for-grant-of-Marketing-Authorisation-of-in-vitro-diagnostic-devices-for-Human-use.pdf

Verified On

2026-09-16

Source Supports
  • class-axis
  • classification-rules
Open ZAMRA Classes A, B, C and D — non-IVD medical devices
Id

zambia:medical-device

Jurisdiction Id

zambia

Domains
  • medical-device
Name

ZAMRA Classes A, B, C and D — non-IVD medical devices

Description

Zambia's own four-class device axis, set out in the ZAMRA guideline Guidelines on the Principles of Medical Devices Classification (ZAMRA/MA/GUD/0002), which is an adaptation of the GHTF document GHTF/SG1/N77:2012 and structures the rules as 7.1 Non-Invasive Devices, 7.2 Invasive Devices, 7.3 Active Devices and 7.4 Additional Rules with Appendix A decision trees. The manufacturer determines the class; where more than one rule applies, or the device has multiple intended uses, it is allocated to the highest class indicated. Dossier depth follows the class: Class A files the shorter Annex II technical package, Classes B to D file the full Chapters 1-6 table of contents.

Classes
  • Id

    a

    Label

    Class A — lowest hazard

    Normalized Risk Level

    low

  • Id

    b

    Label

    Class B

    Normalized Risk Level

    medium

  • Id

    c

    Label

    Class C

    Normalized Risk Level

    high

  • Id

    d

    Label

    Class D — highest hazard

    Normalized Risk Level

    highest

Regulator

Zambia Medicines Regulatory Authority

Official Domains
  • zamra.co.zm
Source Status

official-source-verified

Reference Sources
  • Title

    ZAMRA, Guidelines on Application for Grant of Marketing Authorisation of Non In-Vitro Diagnostic Medical Devices for Human Use (version 2, implemented 21 June 2024), issued under s.68 of the Medicines and Allied Substances Act No. 3 of 2013

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/GUIDELINES-ON-APPLICATION-FOR-GRANT-OF-MARKETING-AUTHORISATION-OF-NON-IVDS.pdf

    Reviewed On

    2026-09-16

    Supports

    The national overlay that turns the class into an obligation and a dossier: marketing authorisation is required by s.39(1) of the Medicines and Allied Substances Act No. 3 of 2013, the class fixes the technical package (Annex II for Class A, Chapters 1-6 for Classes B to D), and the device guideline states that the Authority may reclassify a medical device. Medical devices are not a separate statutory category in Zambia — they are 'allied substances' under the Act's definition, which the Act lists to include medical devices and condoms.

Source Title

ZAMRA, Guidelines on the Principles of Medical Devices Classification (ZAMRA/MA/GUD/0002, version 1, 2018)

Source Url

https://www.zamra.co.zm/wp-content/uploads/2026/06/Guidelines-on-the-Principles-of-Medical-Devices-Classifications-v1.pdf

Verified On

2026-09-16

Source Supports
  • class-axis
  • classification-rules
Registration pathways, prior approvals and planning · 1 record
Open Zambia registration
Country

Zambia

Jurisdiction Id

zambia

Country Code

ZM

Flag

🇿🇲

Regulator

Zambia Medicines Regulatory Authority

Regulator Abbrev

ZAMRA

Region

africa

Tier

3

Risk Classification

4-class (A, B, C and D) — GHTF/IMDRF-derived rules in ZAMRA/MA/GUD/0002 for non-IVDs and a parallel four-class individual/public-health-risk table for IVDs in ZAMRA/MA/GUD/0003

Classes
  • Id

    ivd-marketing-authorisation

    Class Name

    Class A to D in-vitro diagnostic device — marketing authorisation

    Risk Level

    medium

    Pathway

    Marketing authorisation application to ZAMRA under s.39 of the Medicines and Allied Substances Act No. 3 of 2013, filed physically in duplicate with one hard and one soft copy of the full product dossier under ZAMRA/MA/GUD/0003

    Official Timeline
    Min

    180

    Max

    180

    Unit

    working-days

    Verification Status

    official-verified

    Official Source
    Title

    ZAMRA, Guidelines for Grant of Marketing Authorisation of In-Vitro Diagnostic Devices for Human Use (ZAMRA/MA/GUD/0003, version 1.0) — sections 1.9.3 and 1.10.1-1.10.2

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/Guidelines-for-grant-of-Marketing-Authorisation-of-in-vitro-diagnostic-devices-for-Human-use.pdf

    Accessed Date

    2026-09-16

    Realistic Timeline
    Min

    9

    Max

    14

    Notes
    • The published clock is the IVD guideline's: 'All applications shall be evaluated within one hundred and eighty (180) working days from the date of receipt in the order of submission.' It is a queue-inclusive figure, not a pure assessment time, because it runs in order of submission.
    • The clock is not suspended quietly: where the Authority requests additional data the applicant must supply it within 90 working days of the request, and any extension must be requested in writing within 14 days of receipt of the request and be approved by the Authority. If the Technical Committee defers an application for unresolved safety or quality issues and the data is not provided within 90 days, the application is refused; if the applicant misses the response deadline the application is closed and must be refiled as a new application.
    • The realistic range adds the queue and the two-cycle query pattern to the 180 working days, which is roughly 8.3 working months of assessment on its own.
    Clinical Trial Required

    No

    Local Testing Required

    Yes

    Gmp Required

    Yes

  • Id

    non-ivd-expedited-evaluation

    Class Name

    Class A to D non-IVD medical device — expedited evaluation (fast track)

    Risk Level

    medium

    Pathway

    Expedited evaluation authorised by the Authority, charged at double the applicable marketing authorisation fee

    Official Timeline
    Min

    90

    Max

    90

    Unit

    days

    Verification Status

    official-verified

    Official Source
    Title

    ZAMRA, Guidelines on Application for Grant of Marketing Authorisation of Non In-Vitro Diagnostic Medical Devices for Human Use (version 2, implemented 21 June 2024) — section 1(h) and the definition of 'expedited evaluation'

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/GUIDELINES-ON-APPLICATION-FOR-GRANT-OF-MARKETING-AUTHORISATION-OF-NON-IVDS.pdf

    Accessed Date

    2026-09-16

    Realistic Timeline
    Min

    4

    Max

    8

    Notes
    • The non-IVD guideline defines 'expedited evaluation' as 'the express evaluation of a product application within a 90 - day period'. That definition is the published clock this row carries.
    • The Authority authorises expedited evaluation and the guideline states no criteria for granting it, so holding a WHO prequalification, an FDA approval, a CE mark or an approval in an IMDRF member state does not by itself trigger it — those are disclosure items on the Annex I form. The published commercial signal is the fee schedule's 'Fast track fees' head at double the applicable marketing authorisation fee.
    • The IVD guideline defines the equivalent as a 'Fast Track process' without a period of its own.
    Clinical Trial Required

    No

    Local Testing Required

    Yes

    Gmp Required

    Yes

  • Id

    condom-marketing-authorisation

    Class Name

    Condoms — marketing authorisation under the dedicated condom guideline

    Pathway

    Application to ZAMRA for marketing authorisation of a condom under s.39 of the Medicines and Allied Substances Act No. 3 of 2013, evaluated against the condom guideline's dossier requirements with laboratory analysis by the National Drug Quality Control Laboratory against ISO 4074:2015 (male) or ISO 25841:2014 (female), and tabled before the Technical Committee for approval

    Official Timeline
    Min

    365

    Max

    365

    Unit

    days

    Verification Status

    official-verified

    Official Source
    Title

    Guidelines on the Application for Marketing Authorisation of Condoms — ZAMRA guidance for the preparation and submission of dossiers, §1.12.1-1.12.2 Time Frames (acknowledgement within 14 days; review of a new application within 365 days on a first-come basis)

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/Application-for-Marketing-Authorisation-Condoms.pdf

    Accessed Date

    2026-09-16

    Realistic Timeline
    Min

    12

    Max

    18

    Notes
    • Section 1.12.2 (Time Frames — Evaluation of new applications) of the ZAMRA condom guideline: 'All applications shall be reviewed within 365 days from the date of receipt on a first come basis.' The period is queue-inclusive rather than pure assessment time, because it runs on a first-come basis; the same section separately commits the Authority to acknowledge receipt within 14 days (s.1.12.1), which also binds the Authority but is not the review clock.
    • The applicant-facing side of the same section is not part of the clock: 'The applicant shall be requested to provide additional data when required within 120 days of such a request. Should additional time be required, a formal request must be made and approved by the Authority.'
    • The instrument is a device instrument: condoms are an allied substance under the Medicines and Allied Substances Act No. 3 of 2013, and ZAMRA lists this guideline in the Medical Devices section of its guidelines page.
    • CAVEAT 1 — INSTRUMENT CURRENCY, stated rather than resolved: the guideline's own version table carries 'Version 1 draft March 2016', 'Version 1 released for comment April 2016' and 'Deadline for comment May 2016', then leaves both 'Version 2 published for implementation' and 'Date of implementation' blank, and the PDF's metadata Subject field reads 'DRAFT'; the file's embedded metadata gives CreationDate 6 September 2016 and ModDate 24 August 2023, and it is the version the Authority currently hosts in the Medical Devices section of its guidelines page.
    • CAVEAT 2 — INSTRUMENT CONFLICT, stated rather than resolved: the Authority's later general guideline, the Guidelines on Application for Grant of Marketing Authorisation of Non In-Vitro Diagnostic Medical Devices Version 2 published for implementation on 21 June 2024, governs non-IVD medical devices generally, states only that 'An application shall be evaluated on a first come first serve basis unless expedited evaluation has been authorised by the Authority', and fixes no period; condoms are a non-IVD device, so on one reading the 2024 general guideline governs and this 365-day clock is superseded, and on another reading the condom-specific guideline still governs because ZAMRA continues to publish it as the condom route and neither document says it replaces the other. The 365 days is published because it is a period the Authority fixed in a device instrument; the two readings are stated rather than reconciled.
    • The row is route-wide rather than class-specific because the condom guideline fixes one period for the product class it governs, and condoms do not sit on the A-D device axis.
    Clinical Trial Required

    No

    Local Testing Required

    Yes

    Gmp Required

    Yes

Prior Approvals
  • Authority

    WHO Prequalification; US FDA approval; EU CE marking; approval in any IMDRF member state

    Accepted

    No

    Benefit

    Disclosure only. The Annex I application form requires the applicant to state whether the device is WHO prequalified, US FDA approved, CE marked or approved in any IMDRF member state and to attach valid documentation, but neither the non-IVD nor the IVD guideline attaches any procedural consequence — no shortened clock, no abridged dossier and no substitute for ZAMRA's own evaluation.

  • Authority

    Marketing approval in a SADC state

    Accepted

    No

    Benefit

    Disclosure only. The application must list the SADC states where the device has obtained marketing approval and the dossier must include documentary proof of registration in other countries, specifically those in the SADC region. No SADC approval abridges the Zambian evaluation; there is no SADC device approval to rely on.

  • Authority

    ZAMRA or another recognised competent authority GMP inspection report for the same manufacturing site

    Accepted

    Yes

    Benefit

    Abridges the site-inspection step rather than the dossier review: for IVDs the Authority 'shall consider' and for non-IVDs it 'may consider' a previous satisfactory inspection report of the site, provided the inspection was conducted within 24 months preceding receipt of the application.

  • Authority

    China NMPA medical device registration certificate or Class I filing record

    Accepted

    No

    Benefit

    No route. The NMPA is not among the approvals the Annex I form asks the applicant to disclose, and no recognition procedure in the non-IVD or IVD guideline names it. An NMPA certificate may be filed as documentary proof of registration in other countries, which carries no procedural benefit, and it cannot substitute for the Free Sale Certificate, which must be addressed to Zambia from the manufacturer's own authority.

Key Requirements
  • An applicant not resident in Zambia must appoint a local responsible person with a power of attorney, defined as a natural or legal person resident in Zambia appointed by a foreign-based marketing authorisation holder to be responsible for all regulatory matters in respect of products granted marketing authorisation; the Annex I form separately requires the authorised local distributor's details and letter of appointment.
  • An original Free Sale Certificate addressed specifically to Zambia from the manufacturer's home authority (notarized copies acceptable), the manufacturer's manufacturing licence, documentary proof of ISO 13485 compliance and documentary proof of registration in other countries, specifically those in the SADC region.
  • The dossier follows the guideline's Chapters 1-6 table of contents for Classes B to D, or the shorter Annex II package for Class A, with a dedicated Chapter 4 on Clinical Evidence and a Chapter 2 that must include global market history with incident and recall rates.
  • A complete application on filing: the guideline states an application is not accepted where any one of the six listed items is missing — cover letter, completed and signed Annex I form, proof of payment of the prescribed fee, at least two samples in the smallest commercial pack size labelled primarily in English, the completed Annex II checklist, and the product dossier.
  • Applications and supporting documents must be in English, in 12-point Times New Roman or Arial at 1.5 line spacing with sequentially numbered pages; the non-IVD dossier is submitted as an electronic text-selectable PDF via the Authority's online portal, while IVD applications are physically delivered to the Authority.
  • Samples may be analysed by the National Drug Quality Control Laboratory against the manufacturer's claimed specifications and against available local or internationally recognised standards, and the marketing authorisation fees exclude laboratory testing and site audit fees, which are charged separately.
  • An applicant must facilitate site audits of its manufacturing site to demonstrate ISO 13485 compliance; where the Authority cannot inspect it shall (IVDs) or may (non-IVDs) consider previous satisfactory inspection reports from ZAMRA or other recognised competent authorities, provided the inspection was conducted within 24 months preceding receipt of the application.
  • A marketing authorisation is valid for five years from the date of grant subject to terms and conditions the Authority may specify, with an annual retention fee payable by the marketing authorisation holder; suspension or revocation may follow non-payment or an unforeseen high public or personal health risk.
  • Changes are made by amendment application, with the fee schedule distinguishing a minor amendment (US$ 100) from a major amendment (US$ 500) for an imported allied substance; the applicant remains responsible for the product information supporting the application and its variations.
  • Pre-market disclosure obligations: the Annex I form requires the applicant to state whether the device has had previous recalls, reportable adverse incidents, banning in other countries or post-market surveillance studies, and to attach the relevant documentation.
Local Rep Required

Yes

Local Rep Name

Local responsible person (resident in Zambia, appointed by the foreign marketing authorisation holder with a power of attorney); an authorised local distributor is named separately

Mdsap Accepted

No

Mdsap Benefit

MDSAP is not named in ZAMRA's device instruments. The recognised QMS evidence is an ISO 13485 certificate plus a site audit, or a ZAMRA or other recognised competent authority inspection report no more than 24 months old.

Registration Validity

5 years from the date of grant, subject to an annual retention fee

Last Updated

2026-09-16

Verification Status

partially-verified

Official Sources
  • Title

    ZAMRA, Guidelines on Application for Grant of Marketing Authorisation of Non In-Vitro Diagnostic Medical Devices for Human Use (version 2, implemented 21 June 2024) — section 1(h) and the definition of 'expedited evaluation'

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/GUIDELINES-ON-APPLICATION-FOR-GRANT-OF-MARKETING-AUTHORISATION-OF-NON-IVDS.pdf

    Accessed Date

    2026-09-16

  • Title

    ZAMRA, Guidelines for Grant of Marketing Authorisation of In-Vitro Diagnostic Devices for Human Use (ZAMRA/MA/GUD/0003, version 1.0) — sections 1.9.3 and 1.10.1-1.10.2

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/Guidelines-for-grant-of-Marketing-Authorisation-of-in-vitro-diagnostic-devices-for-Human-use.pdf

    Accessed Date

    2026-09-16

  • Title

    Guidelines on the Application for Marketing Authorisation of Condoms — ZAMRA guidance for the preparation and submission of dossiers, §1.12.1-1.12.2 Time Frames (acknowledgement within 14 days; review of a new application within 365 days on a first-come basis)

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/Application-for-Marketing-Authorisation-Condoms.pdf

    Accessed Date

    2026-09-16

  • Title

    ZAMRA Notice to all Manufacturers, Wholesalers, Retailers and Importers of Non-IVD Medical Devices in Zambia, 10 September 2024 — non-IVD device registration in effect on a phased basis from Class A and Class B, with import controls only for Class C and Class D until further notice

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/NOTICE-TO-ALL-IMPORTERS-OF-NON-IVDS.pdf

    Accessed Date

    2026-09-16

Reviewed On

2026-09-16

Process
Template Id

default

Status

planning-template

Usage Rule

Maintained planning steps and estimates, not verified regulator deadlines.

Steps
  • Step

    1

    Title

    Pre-Submission Preparation

    Description

    Gather technical documentation, quality management system (QMS) records, and clinical data required by ZAMRA. Appoint a Local responsible person (resident in Zambia, appointed by the foreign marketing authorisation holder with a power of attorney); an authorised local distributor is named separately.

    Duration

    1-3 months

    Icon

    📋

  • Step

    2

    Title

    Application Submission

    Description

    Submit complete registration dossier to ZAMRA including device description, risk analysis, and testing reports.

    Duration

    1-2 weeks

    Icon

    📤

  • Step

    3

    Title

    Administrative Review

    Description

    ZAMRA reviews application for completeness. May request additional documents or clarifications.

    Duration

    2-4 weeks

    Icon

    🔍

  • Step

    4

    Title

    Technical Evaluation

    Description

    In-depth technical assessment of device safety and performance. ZAMRA may issue questions.

    Duration

    180 working days

    Icon

    ⚙️

  • Step

    5

    Title

    Registration Approval

    Description

    Upon successful review, ZAMRA issues Zambia market authorization certificate.

    Duration

    1-2 weeks

    Icon

Government fee schedules · 1 record
Open Zambia fees
Jurisdiction Id

zambia

Country

Zambia

Country Code

ZM

Authority

ZAMRA

Low Risk Local
Min

500

Max

500

Currency

USD

Per Product

Yes

High Risk Local
Min

500

Max

500

Currency

USD

Per Product

Yes

Details
  • Id

    marketing-authorisation-application

    Item

    Application for marketing authorisation — allied substances imported as finished products

    Currency

    USD

    Amount Local

    500

    Amount Local Formatted

    US$ 500.00

    Frequency

    Per product application

    Notes

    Fee schedule item 3(a), imported-products table. Medical devices are 'allied substances' under the Medicines and Allied Substances Act No. 3 of 2013, so this allied-substance head is the operative device application fee; ZAMRA publishes no separate medical-device fee head. The fee covers evaluation of the initial submission only — laboratory testing and site audits are charged separately.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    annual-retention

    Item

    Annual retention fee — allied substances imported as finished products

    Currency

    USD

    Amount Local

    200

    Amount Local Formatted

    US$ 200.00

    Frequency

    Annually, for the life of the marketing authorisation

    Notes

    Fee schedule item 5(e). Retention is payable annually even though the marketing authorisation runs five years; non-payment is a ground on which the Authority may suspend or revoke the authorisation and remove the device from the register.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    marketing-authorisation-renewal

    Item

    Renewal of marketing authorisation — allied substances imported as finished products

    Currency

    USD

    Amount Local

    350

    Amount Local Formatted

    US$ 350.00

    Frequency

    Every five years

    Notes

    Fee schedule item 6(e).

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    late-renewal-penalty

    Item

    Late submission of an application for renewal of marketing authorisation

    Currency

    USD

    Amount Local

    5

    Amount Local Formatted

    US$ 5.00

    Frequency

    For each day the application is late

    Notes

    Fee schedule item 6(f), imported-products table.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    evaluation-additional-information

    Item

    Evaluating additional information for an application — inadequate technical information (quality, safety or efficacy)

    Currency

    USD

    Amount Local

    400

    Amount Local Formatted

    US$ 400.00

    Frequency

    Per occurrence

    Notes

    Fee schedule item 4(a), imported-products table.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    minor-amendment

    Item

    Minor amendment to a marketing authorisation

    Currency

    USD

    Amount Local

    100

    Amount Local Formatted

    US$ 100.00

    Frequency

    Per amendment

    Notes

    Fee schedule item 7(a), imported-products table. The criteria distinguishing a minor from a major amendment sit in ZAMRA's separate amendment guideline, which was not retrieved.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

  • Id

    major-amendment

    Item

    Major amendment to a marketing authorisation

    Currency

    USD

    Amount Local

    500

    Amount Local Formatted

    US$ 500.00

    Frequency

    Per amendment

    Notes

    Fee schedule item 7(b), imported-products table.

    Amount Status

    exact-current

    Verification Status

    official-verified

    Source Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Source Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Verified On

    2026-09-16

Notes
  • Medical devices are regulated as 'allied substances' under the Medicines and Allied Substances Act No. 3 of 2013, so the allied-substance lines in ZAMRA's fee schedule are the device fee lines. ZAMRA publishes no separate medical-device fee head, and no class-differentiated fee: the application fee is the same for Class A and Class D.
  • The schedule runs two tables. Locally manufactured or packaged allied substances pay in Zambian Kwacha (ZMW 1,500 marketing authorisation, ZMW 1,000 annual retention, ZMW 1,200 renewal, ZMW 400 minor amendment, ZMW 1,950 major amendment, all expressed as fee units at 30 Ngwee per unit). Imported finished products — the table that applies to a foreign device manufacturer — are charged in United States dollars. This record publishes the imported-products table, so its currency is USD; the two tables cannot be mixed inside one record and the importer requires one currency throughout.
  • Fast tracking is charged at double the applicable marketing authorisation fee (fee schedule 'Other fees', item l). That is a published formula rather than a fixed head, so no exact row is asserted here: for an imported allied substance it resolves to US$ 1,000.00. The non-IVD guideline defines 'expedited evaluation' as express evaluation within a 90-day period and the Authority authorises it without published criteria.
  • Good-manufacturing-practice inspection fees for foreign-based manufacturers are set by region and are charged on top of the marketing authorisation fee: full site in Southern Africa US$ 3,500.00, rest of Africa US$ 5,000.00, Far East/Asia US$ 6,500.00, Europe/America/Australia US$ 7,500.00, each additional production line US$ 1,500.00, and GMP document evaluation (desk audit) US$ 3,500.00 per manufacturing site.
  • The 2016 instrument (S.I. No. 38 of 2016) was read by OCR from a scanned gazette PDF in the spine round and its US-dollar amounts were cross-checked against this current published schedule, where they agree unchanged.
  • Advertising and promotion of allied substances carries separate heads in the Kwacha table (ZMW 5,000 advertising to the general public, ZMW 1,000 promotion to health-care professionals, ZMW 2,000 exhibition at a public event). They are worded for medicines and are not published in the imported-products USD table, so they are not asserted as USD amounts here.
Last Updated

2026-09-16

Verification Status

official-verified

Official Sources
  • Title

    ZAMRA, Fees for Marketing Authorisation — 'Application for Marketing Authorisation: Allied Substances Imported as Finished Products' and the other imported-products heads, reproducing the Medicines and Allied Substances (Fees) Regulations (S.I. No. 38 of 2016)

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/07/FEES-FOR-MARKETING-AUTHORISATION-2.pdf

    Accessed Date

    2026-09-16

Reviewed On

2026-09-16

Amount Status

exact-current

Range Available

Yes

Additional certifications and licences · 1 record
Open Zambia certifications
Slug

zambia

Market

Zambia

Confidence

low

Schemes
  • Id

    zamra-electrical-safety-emc-evidence

    Name

    ZAMRA electrical, radiation and standards evidence in the device dossier

    Category

    Medical Electrical Safety

    Status

    Included In Medical Registration

    Object

    Finished Device

    Note

    ZAMRA's Guideline on Application for Grant of Marketing Authorisation of Non In-Vitro Diagnostic Medical Devices, issued under s.68 of the Medicines and Allied Substances Act No. 3 of 2013, carries electrical and radiation safety as dossier evidence rather than as a separate certificate: the Chapter 3 Non-clinical Evidence block requires physical, chemical, electrical, radiation and software studies, and the Annex I application form requires the international or national standards with which the device complies. Zambia operates no low-voltage or EMC regime of its own for medical devices, so an applicant obtains no Zambian electrical-safety certificate — conformity is demonstrated inside the marketing authorisation, and it is the ZAMRA dossier that an applicant has to satisfy. The binding is recorded as candidate because the requirement is read from ZAMRA's own device guideline rather than from a dedicated electrical-safety instrument.

    Source Urls
    • https://www.zamra.co.zm/wp-content/uploads/2026/06/GUIDELINES-ON-APPLICATION-FOR-GRANT-OF-MARKETING-AUTHORISATION-OF-NON-IVDS.pdf
    Source Binding

    candidate

  • Id

    zicta-type-approval

    Name

    ZICTA equipment type approval

    Category

    Radio Spectrum

    Status

    Mandatory If Feature

    Object

    Covered Radio Or Terminal Equipment

    Note

    ZICTA states on its technical-regulation page that all telecommunications equipment and ICT devices must undergo type approval before being sold or used in Zambia, that equipment must comply with ZICTA's relevant technical standards, and that dealers must be registered with ZICTA; the department's mandate is described as overseeing the technical regulation aspects of the Information and Communications Technology Act No. 15 of 2009. A medical device with a radio or telecommunications function — a wirelessly connected patient monitor, a telemetry programmer or a connected IVD analyser — therefore needs a ZICTA type approval in addition to its ZAMRA marketing authorisation. ZAMRA's device guidelines do not mention ZICTA, so the two approvals are independent and neither substitutes for the other.

    Source Urls
    • https://www.zicta.zm/services/technical-regulation
    Source Binding

    reviewed

  • Id

    zcsa-compulsory-standards

    Name

    ZCSA compulsory standards

    Category

    Product Specific Conformity

    Status

    Mandatory At Import

    Object

    Product Under Compulsory Standard

    Note

    The Zambia Compulsory Standards Agency publishes the list of compulsory standards it administers. That list includes ZS ISO 4074: 2015 Natural Latex Rubber Condoms — Requirements and Test Methods, enforced under Statutory Instrument 78 of 2003, so a condom — a medical device class that ZAMRA also registers as an allied substance — must additionally satisfy the compulsory standard at import. The same list carries household electrical appliances, electric cables and batteries, but no medical electrical equipment standard such as the IEC 60601 series appears in it, so on the list as retrieved the agency's reach into devices is the condom entry rather than medical electrical equipment generally.

    Source Urls
    • https://www.zcsa.org.zm/index.php/list-of-compulsory-standards/
    Source Binding

    reviewed

  • Id

    rpa-ionising-radiation-licence

    Name

    Radiation Protection Authority ionising-radiation licence and permits

    Category

    Ionizing Radiation

    Status

    Mandatory For Use Site

    Object

    Radiation Product Importer Or Use Site

    Note

    The Radiation Protection Authority of Zambia licences and regulates facilities using radioactive materials and states that it issues authorisation — permits and licences — to deal with any activity relating to radiation sources, and that it is mandated by the Ionising Radiation Protection Act to maintain an inventory of radiation sources, devices and occupationally radiation exposed workers. The Authority's published renewal practice covers facilities using X-ray machines and radioactive sources, mines and industries using nuclear gauges and X-ray fluorescence analysers, baggage and cargo scanners, and exploration facilities. The obligation attaches to the importing or using facility rather than to the product's marketing authorisation, so a Zambian hospital, clinic or industrial site must hold a valid ionising-radiation licence before it operates the equipment. The binding is candidate because the Authority's licensing page names the Act without a section or a number, so no article is asserted.

    Source Urls
    • https://rpa.gov.zm/licensing/
    Source Binding

    candidate

Official Sources
  • Authority

    ZAMRA

    Topic

    marketing authorisation guideline for non-IVD medical devices — electrical, radiation and standards evidence in the dossier

    Url

    https://www.zamra.co.zm/wp-content/uploads/2026/06/GUIDELINES-ON-APPLICATION-FOR-GRANT-OF-MARKETING-AUTHORISATION-OF-NON-IVDS.pdf

  • Authority

    ZICTA

    Topic

    technical regulation and type approval of telecommunications and ICT equipment

    Url

    https://www.zicta.zm/services/technical-regulation

  • Authority

    ZCSA

    Topic

    list of Zambia national compulsory standards and their statutory instruments

    Url

    https://www.zcsa.org.zm/index.php/list-of-compulsory-standards/

  • Authority

    RPA

    Topic

    licensing of activities involving ionising radiation sources and devices

    Url

    https://rpa.gov.zm/licensing/

Keep researching this market
View the Zambia resource hub →
DJ Fang
Need to apply Zambia's requirements to a product?
Confirm the current ZAMRA pathway, evidence, and local-role details for the actual device before filing.
Pricing